Tag Archives: pioneering at the scout jamboree

AT&T Spoof “Signal” Tower at the Jamboree

After a supply of bamboo was used for the gateway to Peschke Field up on Garden Ground Mountain, a team of Pioneering staff received the inspiration to use most of what was left over to comically copy one of AT&T’s nearby cell towers.

The AT&T Cell Tower made out of Bamboo in the Pioneering Area of the 2013 National Jamboree
The AT&T Cell Tower made out of Bamboo in the Pioneering Area of the 2013 National Scout Jamboree

The 30-foot clever creation received a good deal of acclaim as Scouts and Scouters observed the structure and came to the obvious conclusion that the bamboo tower was a tongue-in-cheek reproduction of the highly technical real thing.

A central aspect of pioneering is to ingeniously and skillfully make do with what one has and use it to the best possible advantage, sometimes out of necessity, sometimes for utility, and sometimes for fun. 

PIONEERING AREA: TOWERS

JAMBOREE PIONEERING AREA: MAIN PAGE

Jamboree Pioneering: The Building Process

Bridge Crew
The Crew on their Pre-stressed Triple Walkway Bridge

After the spars were skinned and the initial supply of ropes were cut and whipped, there were about three days to build the pioneering area and batten down the hatches in readiness for the first troops to take the hike up to Garden Ground. There were thirty projects and structures to build and fifty pioneering area staffers to do the work, so the staff was split into construction crews and assigned various tasks.

Here are some photos revealing a bit of the work entailed in the overall building process.  All thirty projects and structures can be seen and reviewed by following the links on the jamboree pioneering area: main page. The entire jamboree project area layout can be seen here.

Building the Double A-Frame Monkey Bridge and Pre-stressed Triple Walkway Bridge
Building the Double A-Frame Monkey Bridge and Pre-stressed Triple Walkway Bridge
Building a Couple of Catapults and Putting Together the Walkway Subassemblies for the Single A-Frame Bridge Kits
Building a couple of Catapults and the Walkways for the Single A-Frame Bridge Kits
Building One of the Derricks, the Swing Boast, and Tic-Tac-Toe Activity
Building one of the Derricks, the Swing Boat, and lashing together the top subassembly for the Carousel
 Lashing Together an Hourglass and Two Small Climbing Towers
Lashing together an Hourglass and two Small Climbing Towers
Creating the AT&T "Signal" Tower and Constructing the Climbing Area
Creating the AT&T “Signal” Tower and constructing the Climbing Area
Building a Rope Ladder, Chippewa Kitchen, and Battering Ram
Building a Rope Ladder, Chippewa Kitchen, and Battering Ram

What hasn’t been described or captured in photographs is the initial and ongoing process to gather and prepare mallet heads and handles for the Mallet Making Station. The demand for more and more materials was so great, each morning, mallet handle foraging expeditions were in full swing!

JAMBOREE PIONEERING AREA: MAIN PAGE

Jamboree Pioneering Area: Initial Preparations

Our Inimitable Quarter Master: Benny Poedjono waits on RIck Strong.
Our Inimitable Quarter Master: Benny Poedjono waits on RIck Strong.

Ropes. For thirty different pioneering projects and structures, plenty of rope had to be measured, cut, and whipped for lashings, anchors, and guylines. We had plenty of manila and appropriate synthetic fiber rope in a variety of diameters on hand, and thanks to a well-organized storage arrangement and experienced quartermaster, ongoing supplies were readily available.

“We’ve got spars!” Of course the spars for our pioneering projects were a major consideration. Where would they come from, and how would we get them? By emailing this photo (on right) with the simple statement, “We’ve got spars!”, our director, Jim Keller let us know that spars for our projects and structures had been delivered to Garden Ground Mountain! Naturally, before we could build anything, they’d have to be skinned!

Spars were waiting to be skinned and utilized up on Garden Ground in readiness for the arrival of the Jambo Pioneering Staff.
Spars were waiting to be skinned and utilized up on Garden Ground in readiness for the arrival of the Jambo Pioneering Staff.

Skinning Spars. Starting full swing on the 11th of July morning, and continuing through the end of the 12th, amidst pouring rain with steadfast purpose and draw knives, a full crew persistently and methodically set upon the pile of heavy, hardwood spars. In spite of the tedious and often bent-over, backbreaking work, sloshing through mud in water-logged boots, spirits were high! There was something about working hard up on that mountain along with a like-minded, jovial crew that kept us going in fine form up to and after the very last spar had been relieved of its bark.

Notice how the pile is progressively getting smaller! (Photos taken in between periods of rain.) Click for larger view, and click again for detailed images.
Notice how the pile is progressively getting smaller! (Photos taken in between periods of rain.) Click for larger view, and click again for detailed images.
Spars are selected from a centrally-located area and often cut to size in accordance with the needs of each project
Spars are selected from a centrally located area and often cut to size on the spot in accordance with the needs of each project
Spars Situated and Sorted
Spars Situated and Sorted

After spars were skinned, they were transported to central locations throughout the pioneering area and selected by crews in accordance with their length and diameter to meet the material requirements for specific pioneering structures and projects. Most often, they’d be sawed to the desired lengths before being carried off to various construction sites. The total pioneering area was later dubbed: Peschke Field (named after pioneering legend, Adolph Peschke).

Why skin the spars? Basically, there are three reasons:

  1. If tied on top of bark, lashings are prone to slip, if the bark shifts or loosens under the strain during use.
  2. Skinned spars last longer than those left with the bark on. Unskinned spars are more subject to rotting from moisture and more susceptible to weakening from insects.
  3. Pioneering projects with skinned spars look really nice.
Butterfly Knots are tied in the dragging rope to form handholds.
To retrieve the poplar flagpole, butterfly knots were tied in the dragging rope to form handholds.

Transporting heavy spars. An extra long spar for the flagpole and larger-diameter spars for the climbing area had to be moved by entire crews. The 30′ poplar flagpole was dragged by tying butterfly knots for handholds in the dragging line. The uprights for the climbing area were lifted and carried by joining the ends of a rope and threading it under the log so that a series of two carriers grabbing a hold of the rope could walk the spar along on either side.

Carrying a heavy spar in pairs, along each side.
Carrying a heavy spar for the climbing area in pairs, along each side.

JAMBOREE PIONEERING AREA: MAIN PAGE

Pioneering Area, 2013 National Jamboree

Link to: Pioneering Legend: Adolph Peschke

The Pioneering Area was named Peschke Field after Adolph Peschke, who through the years had motivated and inspired so many with his high standards, creativity, and pioneering know-how.

The following layout is a depiction of the pioneering projects and activities featured at the 2013 national jamboree up on Garden Ground Mountain at the Summit Bechtel Reserve. For a larger view, click on the layout once. Then, for a closer view, click on any section you choose:

Layout of the 2013 National Jamboree Pioneering Area up on Garden Ground Mountain at the Summit Bechtel Reserve
Layout of the 2013 National Jamboree Pioneering Area up on Garden Ground Mountain at the Summit Bechtel Reserve
The Gateway leading to the Pioneering Area and Flying the Colors over Peschke Field from our Central Flagpole
The Gateway leading to the Pioneering Area, and Flying the Colors over Peschke Field from a 30′ Poplar Flagpole

JAMBOREE PIONEERING AREA: MAIN PAGE